Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies HVAC Cleaning in Alpharetta: What to Know First
We provide independent Abatement Technologies HVAC cleaning in Alpharetta for homeowners who want the work documented, not just done. A typical evaporator coil or blower cleaning runs $280-$520 depending on access and contamination level, and we deliver a written price before touching a single panel. Most Abatement Technologies air handler jobs in Alpharetta schedule within 3-5 business days.
This page is for owners of Abatement Technologies HEPA filtration systems, portable air scrubbers, and negative air machines who need the HVAC side cleaned properly - the blower, coil, and plenum that move air through your Alpharetta home. We’re not affiliated with Abatement Technologies. Call (678) 679-7540 for a free written estimate.
How Abatement Technologies Products Fail - and How We Fix Them
- PREDATOR 750 Series blower motor burnout from dust loading. The 750 series moves high CFM through remediation sites, and when that same unit gets redeployed in an Alpharetta home’s HVAC loop without blower cleaning, the centrifugal wheel loads with construction dust. We remove the wheel assembly, clean it in a contained wash station, and verify amp draw against the nameplate before reassembly. The camera goes in first. Everything else follows from what it shows.
- HEPA-AIRE SAH2 secondary filter collapse from moisture carryover. In Alpharetta’s humid shoulder seasons, a dirty evaporator coil can throw enough condensate to saturate the SAH2’s final filter stage. The filter media delaminates and restricts airflow. We clean the coil with foaming cleaner rated for aluminum microchannel fins, then replace the filter with OEM-spec media - aftermarket HEPA here often fails the pressure-drop test.
- PAS2400 portable scrubber: intake grille fouling from pollen load. Alpharetta’s spring oak and pine pollen coats the PAS2400’s pre-filter and blower inlet in weeks. Homeowners think the unit’s failed when it’s just choked. We strip the intake plenum, photograph the buildup, and restore factory airflow curves. No guesswork - we measure static pressure before and after.
- Abatement Technologies CAP600-UV coil pan microbial growth. The ultraviolet add-on works only on surfaces the light line-of-sight reaches. The condensate pan below the coil stays dark and wet, growing biofilm that smells and restricts drainage. We clean the pan mechanically, treat with EPA-registered antimicrobial, and verify the UV lamp output in microwatts - lamps degrade faster than owners realize.
- Guardian R500 air handler: heat exchanger soot scaling from prior venting issues. In Alpharetta’s older Windward and Crabapple subdivisions, we’ve found R500 units with exchanger passages narrowed by prior combustion events. Cleaning requires rotary brushing with nylon, not wire, to protect the aluminized steel. We borescope every passage and deliver the photo record. Haven Standard Clause 1 applies: written price before any work starts.
Our Abatement Technologies HVAC Cleaning Process
- 1
System identification and photo baseline. We record the Abatement Technologies model, serial, and installation date, then photograph every accessible component before disassembly.
- 2
Static pressure and airflow diagnostics. We measure total external static pressure across the air handler and compare to the manufacturer’s fan curve. This tells us whether the problem is dirt, restriction, or mechanical wear.
- 3
Component-level cleaning with brand-appropriate chemistry. Evaporator coils get foaming cleaner safe for microchannel aluminum. Blowers get contained wash and balance check. Heat exchangers get rotary brush and vacuum extraction. We use Nikro negative-pressure equipment and Abatement Technologies-branded accessories where the job spec calls for them.
- 4
OEM vs. aftermarket parts decision, documented. If a filter frame, UV lamp, or gasket needs replacement, we show you the exact part number, OEM price, and quality aftermarket option. You choose before we order. Haven Standard Clause 1.
- 5
Post-cleaning verification and photo record delivery. We re-test static pressure, amp draw, and temperature split. The before-and-after photo record goes to your email as a PDF before the crew leaves. The 365-Day Done Right Promise begins at that moment.
Before
AfterWhat Abatement Technologies HVAC Cleaning Costs in Alpharetta
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Evaporator coil cleaning | $280-$410 | Access panel configuration, fin corrosion, refrigerant recovery needed |
| Blower assembly cleaning | $240-$360 | Wheel removal difficulty, motor bearing condition |
| Air handler full clean (coil + blower + pan) | $420-$520 | Contamination depth, UV lamp replacement, filter media grade |
| Heat exchanger cleaning | $310-$480 | Passage count, soot vs. scale, borescope documentation time |
| Condenser coil cleaning (outdoor unit) | $180-$290 | Refrigerant line protection, fin straightening, surrounding debris |
These are whole-system prices, not per-vent come-ons. We deliver the written price before work starts - no exceptions. Call (678) 679-7540 for your exact number; estimates are free.
Why Alpharetta Homeowners Call CleanRun Air Duct Cleaning Alpharetta for Abatement Technologies Work
We’ve cleaned Abatement Technologies equipment in Alpharetta since 2013, including a cluster of homes near Avalon where the construction debris in new ductwork still surprises Tomas Reyes - he’s pulled drywall compound chunks from blower housings that were supposedly “ready for occupancy.”
Our technicians are background-checked, uniformed, and identified by name before arrival - Haven Standard Clause 3: Verified Crews. They carry Rotobrush, Nikro, and Abatement Technologies equipment on every truck, and they know Lennox, Trane, and Carrier systems when your home has mixed hardware. The 365-Day Done Right Promise is backed in writing on every job, not just stated in marketing copy. The photo record is standard, not an upsell.
FAQs
No, properly performed HVAC cleaning does not void your Abatement Technologies warranty. Warranty issues arise only when unqualified work damages components - we document our process with photos and written scope to protect both parties. If you have a specific warranty concern, we’ll review your documentation before starting. Call (678) 679-7540 and we’ll walk through it.
OEM filters guarantee the pressure-drop and efficiency curves the system was designed for. Quality aftermarket filters from Honeywell or Aprilaire can perform equivalently if they match the MERV rating and frame dimensions exactly - we show you both options with part numbers before you decide. Haven Standard Clause 1: written price before work starts.
Our Documented Photo Record shows the inside of every duct run, coil face, and blower wheel before and after. You receive this as a PDF before the crew leaves. Since 2013, we’ve delivered this on every one of our 52,000+ jobs. If a company won’t show you what they found, they probably didn’t look.
Clean it first, then decide. A thorough cleaning with static pressure testing reveals whether the heat exchanger, coil, or blower is actually failing or just dirty. We’ve saved Alpharetta homeowners full replacement costs when the real issue was a loaded blower wheel and a weak capacitor. We deliver the photo evidence and a written second opinion - no charge for the assessment if you choose replacement elsewhere.
Every 3-5 years for most Alpharetta homes, sooner if you have pets, recent construction, or run the system continuously through pollen season. The red clay dust from north Georgia construction and the high oak pollen count here load filters and coils faster than coastal or northern climates. We check static pressure annually as part of our maintenance recommendation - when it rises 20% above baseline, it’s time.
Ready for a written estimate? Call (678) 679-7540. A live person answers, we’ll schedule around your availability, and you’ll have a flat price in writing before any work begins.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Alpharetta at CleanRun Air Duct Cleaning Alpharetta, serving Alpharetta and nearby areas.