Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Aprilaire Duct Repair & Sealing in Alpharetta: What to Know First
CleanRun Air Duct Cleaning Alpharetta provides independent Aprilaire duct repair and sealing throughout Alpharetta, with most repairs scheduled within a few business days and completed in a single visit. Every job starts with a written price before any panel comes off, and every duct run is photographed before and after so you can see what was actually found. We are not affiliated with or authorized by Aprilaire; we are an independent service provider who works on the systems already installed in Alpharetta homes.
This page is for homeowners running Aprilaire air cleaners, humidifiers, or ventilation controllers who have noticed uneven temperatures, rising energy bills, or visible duct damage and want the repair documented in writing before work begins. Call (678) 679-7540 for a free estimate.
How Aprilaire Products Fail - and How We Fix Them
- Model 5000 Electronic Air Cleaner: The high-voltage power supply generates ozone that degrades flex duct connections over time, especially at the plenum (the main distribution box where all duct runs originate). We find cracked collars and separated seams within 18 inches of the unit in roughly one-third of Alpharetta homes we inspect. Our fix is metal-backed mastic sealant at the plenum collar, plus replacement of degraded flex with R-8 insulated duct where the original run has hardened.
- Model 800 Steam Humidifier: The 240-volt heating element cycles aggressively during Alpharetta’s dry winter months, creating thermal expansion stress at the 6-inch supply tap. The tap loosens in the sheet metal, producing a whistle and conditioned air loss into the attic or crawl space. We cut back to sound metal, install a reinforced start collar, and seal with UL-181 mastic rated for the temperature swing.
- Model 8126X Ventilation Controller: The continuous low-speed operation this controller maintains for fresh-air intake pressurizes ductwork differently than standard HVAC cycling. In Alpharetta’s newer construction, particularly near Avalon where we have worked extensively, the builder-grade flex duct was never designed for constant static pressure. We find sagging runs and disconnected boots (the transition piece between duct and register) that standard HVAC contractors miss because their tests run only in heating or cooling mode. We repair with rigid metal where accessible and support flex runs with proper strapping.
- Model 1850/1870 Dehumidifiers: The dedicated return-and-supply duct configuration creates a closed loop that magnifies any existing leak. If the return plenum has a gap at the filter rack, the dehumidifier pulls unconditioned attic air directly through that gap, bypassing the filter entirely and loading the coil with fiberglass and cellulose debris. We seal the filter rack with gasketed retainers and pressure-test the loop before declaring the job complete.
- Model 1210/2210/3210 Media Air Cleaners: The 1-inch bypass damper on these cabinet models is often installed with a single screw that loosens from vibration. The damper flutters, creating a rhythmic banging audible through the ductwork and eventually cracking the cabinet seal. We replace the factory screw with a locking nut and bolt assembly, reseal the cabinet with foil tape rated for the pressure differential, and photograph the damper position so you have a baseline for future inspections.
Our Aprilaire Duct Repair & Sealing Process

- 1
Camera inspection first. We run a borescope through every accessible duct run to document the condition before touching a tool. The camera goes in first. Everything else follows from what it shows.
- 2
Static pressure test. We measure total external static pressure (the resistance the blower works against) with the Aprilaire accessory operating, not just the furnace fan. This reveals leaks that only appear under the actual operating conditions of your system.
- 3
Written scope and price. Before any repair begins, you receive a written description of what we found, what we propose, and the exact price. Haven Standard Clause 1: no work without a written price agreed in advance.
- 4
Parts selection. We use OEM Aprilaire components where the warranty or fit demands it, and quality aftermarket equivalents where the specification is standard. We tell you which we are using and why, and we do not mark up OEM parts beyond documented trade pricing.
- 5
Repair and seal. We repair or replace damaged duct sections, seal all joints with mastic or foil tape as appropriate to the pressure and temperature, and support flex runs to prevent future sagging.
- 6
Post-repair verification. We rerun the static pressure test, photograph every repaired run, and deliver the photo record with your invoice. The 365-Day Done Right Promise applies from this moment.
Before
AfterWhat Aprilaire Duct Repair & Sealing Costs in Alpharetta
| Scenario | Typical Range |
|---|---|
| Single flex duct run repair and seal (plenum to register) | $340 - $520 |
| Metal duct seam sealing with mastic, per system | $280 - $440 |
| Aprilaire humidifier supply tap repair with collar replacement | $260 - $380 |
| Whole-system flex duct replacement with R-8 insulation | $1,800 - $3,200 |
| Dehumidifier closed-loop pressure test and seal | $320 - $480 |
What moves the price: accessibility (attic vs. crawl space vs. finished basement), the extent of degraded material needing replacement versus sealing, and whether the Aprilaire accessory requires temporary disconnect and reconnect. We do not price per vent or per linear foot; we price per system, agreed before work starts. Call (678) 679-7540 for an exact quote - estimates are free.
Why Alpharetta Homeowners Call CleanRun Air Duct Cleaning Alpharetta for Aprilaire Work

We have worked on Aprilaire systems in Alpharetta since 2013, including a concentration of homes near Avalon where construction debris in the original ductwork still turns up during inspections. Tomas Reyes, our owner, learned the mechanical trades at Bronx Community College and spent nearly two decades on HVAC systems before relocating the business south. He arrives with a camera and leaves a written summary of particulate buildup, debris composition, and duct integrity notes before any scope is discussed.
Every technician is background-checked and uniformed under Haven Standard Clause 3: Verified Crews. We also service Lennox, Trane, and Carrier systems, which matters when your Aprilaire is integrated with a multi-brand setup and the problem is at the interface. The 365-Day Done Right Promise is in writing on every job, not a policy subject to manager approval. The photo record is delivered as a standard deliverable, not an upsell.
FAQs
No, duct repairs performed by an independent service provider do not void the Aprilaire product warranty, provided the work does not alter the unit’s electrical or control components. We document our scope precisely to avoid any ambiguity if a future warranty claim arises. If your Aprilaire is still under warranty and the issue is with the unit itself, not the ductwork, we will tell you that before we touch a tool. Call (678) 679-7540 and we will review your situation.
Replace when more than 40 percent of the duct surface is degraded flex with visible tears, or when metal ductwork has rust-through at multiple seams. Repair when the damage is localized to connections, a few runs, or seal failures at the plenum. We make this recommendation based on what the camera shows and what the pressure test measures, not a sales target. Call (678) 679-7540 for a free inspection.
We stock common Aprilaire collars, dampers, and cabinet hardware for the model lines we see most often in Alpharetta. For less common components, we source from regional distributors with next-day availability in most cases. We do not begin a job until we have confirmed parts in hand, and we tell you the timeline in writing before you commit. Call (678) 679-7540 for current availability on your specific model.
Most single-issue repairs, such as a humidifier tap reseal or a flex run replacement, are completed in two to four hours. Whole-system sealing or extensive flex replacement may extend to a full day. We give you a time estimate with the written price, and we do not leave the job partially finished. Call (678) 679-7540 to schedule.
You receive a Documented Photo Record of every duct run, before and after, as part of the standard job record. You also receive the post-repair static pressure readings, which should show measurable improvement if sealing was effective. We have held this practice since our first job in 2013. If the numbers do not improve, we do not invoice for sealing. Call (678) 679-7540 to discuss what documentation you will receive.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Alpharetta at CleanRun Air Duct Cleaning Alpharetta, serving Alpharetta and nearby areas.




Before
After
Before
After
Before
After