Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Honeywell Air Quality & Sanitizing in Alpharetta: What to Know First
CleanRun provides independent Honeywell air quality and sanitizing service in Alpharetta, with most residential jobs scheduled within 2-4 business days and completed in a single visit. Whole-system sanitizing with Honeywell-compatible UV or purifier integration typically runs $340-$780 depending on duct configuration and whether existing hardware must be removed. Every job starts with a written price before any panel comes off, and every duct run is photographed before and after.
This page is for Alpharetta homeowners running Honeywell whole-home air purifiers, UV treatment systems, or media filters who have noticed persistent odors, elevated allergy symptoms, or visible microbial growth at registers. We also service Lennox, Trane, and Carrier systems, but this page covers what we do differently on Honeywell equipment. Call (678) 679-7540 for a free estimate.
How Honeywell Products Fail - and How We Fix Them
- UV2400U and UV100A lamp degradation without indicator failure. The status LED on these Honeywell ultraviolet systems often stays green even when lamp output drops below effective microbe-kill range. We measure actual UV-C output with a radiometer, not the LED, and replace with OEM-spec 36W or 55W lamps depending on plenum size.
- F100 and F200 media cabinet bypass leakage. The snap-track seals on these whole-home media filters compress over 3-5 Alpharetta cooling seasons, allowing unfiltered return air to bypass the media entirely. We document bypass with a smoke pencil, replace the track gaskets, and verify seal integrity with a manometer reading.
- TrueCLEAN FH8000 ionic cell fouling in high-humidity months. Alpharetta’s July-September humidity loads cause premature cell contamination that the standard cleaning cycle won’t clear. We remove the cell, clean with manufacturer-specified solution, and test post-clean ion output - replacement only when output falls below 2.0 kV.
- DR90 and DR120 dehumidifier drain pan microbial growth. The shallow pan design on these whole-home dehumidifiers traps condensate in Alpharetta’s shoulder seasons when run cycles are short. We treat with EPA-registered sanitizer, verify drain slope, and install a pan overflow switch if absent.
- Zone board damper actuator seal breakdown. Honeywell HZ432 and similar zone panels rely on flexible duct connections that degrade from attic temperature swings in Alpharetta’s variable spring and fall weather. We replace with silicone-reinforced collars and photograph the connection before closing access.
Our Honeywell Air Quality & Sanitizing Process

- 1
Written price delivered. We inspect access, duct count, and existing Honeywell hardware, then provide a fixed price under Haven Standard Clause 1 before any work begins.
- 2
Camera inspection of every run. The camera goes in first. Everything else follows from what it shows. We document debris depth, microbial staining, and duct integrity at each register and trunk connection.
- 3
Equipment-specific sanitizing protocol. We match treatment to Honeywell component type: UV lamp replacement per output measurement, media cabinet resealing, ionic cell cleaning or replacement, or whole-system antimicrobial fogging with negative-pressure extraction.
- 4
OEM or verified-equivalent parts. We stock Honeywell OEM lamps, cells, and gaskets; when aftermarket equivalents meet manufacturer spec, we show the customer both options in writing with warranty terms.
- 5
Post-treatment verification and photo record. After sanitizing, we re-camera critical runs, measure airflow at registers, and deliver the complete photo record with the written scope as standard deliverables.
- 6
365-Day Done Right Promise activation. The written guarantee goes into effect when we leave, backed by Haven Standard Clause 5, not subject to manager approval.
Before
AfterWhat Honeywell Air Quality & Sanitizing Costs in Alpharetta
| Service | Typical Range | What Moves the Price |
|---|---|---|
| UV lamp replacement (UV2400U/UV100A) | $180-$340 | Plenum access difficulty, single vs. dual lamp |
| Media cabinet reseal (F100/F200) | $220-$380 | Track condition, filter size (16×25 vs. 20×25) |
| Ionic cell clean/replace (FH8000) | $260-$520 | Clean vs. replace, cell generation |
| Whole-system sanitizing with photo record | $340-$780 | Duct run count, microbial severity, access type |
| Dehumidifier pan treatment (DR90/DR120) | $180-$290 | Overflow switch addition, drain line condition |
These are whole-system prices, not per-vent teaser rates. The price we write is the price you pay. Call (678) 679-7540 for an exact quote - estimates are free.
Why Alpharetta Homeowners Call CleanRun Air Duct Cleaning Alpharetta for Honeywell Work

We’ve been in Alpharetta homes since 2013, and the construction debris Tomas Reyes found in ducts near Avalon during the build boom still shows up in systems less than ten years old. Our approach hasn’t changed: camera first, written price, documented result. Every technician is background-checked and uniformed under Haven Standard Clause 3: Verified Crews. We carry Lennox, Trane, and Carrier expertise as well, which matters when your Honeywell components integrate with mixed-manufacturer HVAC systems common in Alpharetta’s 2015-2025 builds. The 365-Day Done Right Promise is in writing on every job, and the photo record is delivered before we leave, not upon request.
FAQs
No, when performed by a qualified technician using manufacturer-compatible methods and parts. As an independent Honeywell service provider, we follow Honeywell’s published maintenance specifications and use OEM or equivalent components. We document parts serial numbers and installation details so warranty claims remain valid. Call (678) 679-7540 if you have a specific warranty concern.
The LED indicator is not reliable - we’ve measured UV2400U lamps showing green while output fell below microbe-kill threshold. We verify with a radiometer reading in microwatts per square centimeter at the lamp surface. If you haven’t had the output measured in two years, schedule inspection.
Repair makes sense when the chassis is intact and replacement parts are available at less than 60% of new-equipment cost. We assess cell or lamp housing condition, control board function, and filter track integrity before recommending either path. The written estimate shows both options when replacement is competitive.
Most residential jobs run 2.5 to 4.5 hours depending on duct run count and whether UV or ionic components need removal for off-site cleaning. We schedule a four-hour window and update you if the scope changes based on camera findings.
The $79 coupon model typically covers a brief vacuum at accessible registers without component removal, UV verification, or photo documentation. We price the complete job - every run accessed, every Honeywell component tested, every result photographed - with the number fixed before work starts.
Ready to see what’s actually in your ducts? Call (678) 679-7540 for a free estimate. We’ll deliver a written price, show you the camera feed, and leave a documented record of every run we touch.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Alpharetta at CleanRun Air Duct Cleaning Alpharetta, serving Alpharetta and nearby areas.




Before
After
Before
After
Before
After