Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Nikro Air Duct Cleaning in Alpharetta: What to Know First
CleanRun provides independent Nikro air duct cleaning in Alpharetta for residential and commercial systems, with most jobs completed in a single scheduled visit and a written price delivered before any work begins. A typical whole-system cleaning for a Nikro-equipped home in Alpharetta runs $380-$620 depending on duct count and accessibility, with no per-vent add-ons or post-arrival surprises. We are not affiliated with or authorized by Nikro; we service their equipment as an independent Nikro service provider using trade-recognized tools including Nikro’s own negative-pressure systems alongside Rotobrush and Abatement Technologies equipment. If you own a Nikro air duct cleaning system or have Nikro components in your HVAC setup and need service in Alpharetta, call (678) 679-7540 for a free written estimate.
How Nikro Products Fail - and How We Fix Them
- Nikro HP20 & HP20G portable extractors: The vacuum motor seals harden faster than spec in Alpharetta’s humidity, especially in homes near the Chattahoochee where indoor moisture runs high. We replace with OEM Nikro seals or cross-matched equivalents from Abatement Technologies, then pressure-test the housing before the unit leaves our van.
- Nikro SL4000 air duct cleaning systems: The flex-shaft cable develops memory kink at the 35-foot mark after repeated use in tight Alpharetta crawl spaces, particularly in the older ranch homes off Rucker Road. We bench-test shaft straightness on arrival and swap for Nikro OEM or Guardsman-compatible cable when runout exceeds 3/16 inch.
- Nikro 860284 HEPA filter canisters: The gasket channel cracks where the plastic meets the metal band, a failure mode that doesn’t show until you pressurize the system. We inspect under load and replace the full canister assembly rather than patching, because partial seal failure dumps debris back into the supply plenum, the main distribution box that feeds air to every room.
- Nikro 220V gas-powered truck mounts: The blower impeller strips at the keyway on jobs where previous operators ran the unit with a blocked inlet, a common issue we see in commercial cleans around North Point Mall where crews rushed the pre-filter check. We machine a new keyway or source the impeller from Nikro’s Illinois parts depot, typically 3-4 day lead time.
- Nikro dryer vent rotary kits: The nylon brush heads melt onto the shaft when pushed through lint-choked vents in Alpharetta’s newer construction, especially the townhome clusters near Avalon where builders used extended horizontal runs. We extract the fused brush, inspect the vent with a camera, and switch to a steel whip head on a Nikro-compatible flex rod for the remainder of the job.
Our Nikro Air Duct Cleaning Process

- 1
Call and scope. We ask about your Nikro model, the last service date, and any specific symptoms. A live person answers, every time.
- 2
On-site written price. Tomas Reyes or a uniformed, background-checked technician arrives, identifies themselves by name, and delivers a written price before touching your system. Haven Standard Clause 1.
- 3
Camera inspection. The camera goes in first. Everything else follows from what it shows. We document particulate buildup, debris composition, and duct integrity notes on every run.
- 4
Equipment match. We select the right tool for your specific Nikro configuration, OEM or quality aftermarket, and explain the choice before starting.
- 5
Negative-pressure extraction and cleaning. We seal registers, establish negative pressure in the plenum, and agitate debris with brushes or whips matched to your duct material.
- 6
Photo record and test. After photos of every run, we verify airflow and static pressure, then leave you with the documented photo record and the 365-Day Done Right Promise in writing.
Before
AfterWhat Nikro Air Duct Cleaning Costs in Alpharetta
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Residential whole-system cleaning (Nikro-compatible) | $380-$620 | Duct run count, plenum accessibility, presence of microbial growth requiring sanitizing |
| Commercial Nikro system service | $720-$1,400 | Square footage, number of air handlers, after-hours scheduling |
| Nikro equipment repair (extractor, truck mount, portable) | $180-$550 | Parts availability, OEM vs. aftermarket choice, bench time |
| Dryer vent cleaning with Nikro rotary kit | $140-$220 | Run length, number of turns, roof termination vs. wall |
| Video inspection only | $95-$145 | Number of access points, system complexity |
Every price is one flat price per system, agreed in writing before work starts. No per-vent pricing. No post-arrival add-ons. Call (678) 679-7540 for a free written estimate.
Why Alpharetta Homeowners Call CleanRun Air Duct Cleaning Alpharetta for Nikro Work

We’ve cleaned duct systems in Alpharetta since 2013, including the construction-heavy stretch near Avalon where Tomas Reyes still finds builder’s debris in ductwork that should have been cleared a decade ago. Our 365-Day Done Right Promise is backed in writing on every job, not buried in a policy manual. Every technician is background-checked and uniformed under Haven Standard Clause 3: Verified Crews. We also service Lennox, Trane, and Carrier systems, so if your Nikro equipment interfaces with a mixed-brand HVAC setup, we don’t need a second contractor. The photo record is standard, not an upgrade. The price is written, not whispered. That’s the difference between a visit and a documented job.
FAQs
No, professional air duct cleaning does not void Nikro’s equipment warranty, provided the work is performed by a qualified technician without altering factory specifications or using non-compatible replacement parts in a way that causes damage. We document our process and parts used so any warranty claim remains clean. Call (678) 679-7540 if you need a copy of our service documentation for your records.
We show you the part in its packaging before installation and record the part number in your job documentation. If we recommend a quality aftermarket equivalent, we explain the cross-reference and price difference before you approve the work. Haven Standard Clause 1 requires written authorization for any substitution.
Replace the unit if repair costs exceed 60% of replacement value, if the motor has two or more prior rewinds, or if Nikro has discontinued parts support for your series. We provide both repair and replacement written prices so you can compare. Call (678) 679-7540 for a free second opinion on any estimate you’ve already received.
Most single-system residential jobs take 3 to 5 hours from arrival to final photo review, depending on duct run count and contamination level. We schedule a specific arrival window, not a vague morning or afternoon block, because Tomas Reyes coaches youth soccer on weekends and keeps a stricter schedule than most contractors you’ll meet.
The $79 coupon model relies on arriving with a shop-vac and selling upgrades once inside your home. We don’t do that. Our price covers the full system, every run photographed, with the scope written before we start. The difference is visible in the photo record.
Written by Tomas Reyes, Owner, CleanRun Air Duct Cleaning Alpharetta at CleanRun Air Duct Cleaning Alpharetta, serving Alpharetta and nearby areas.




Before
After
Before
After
Before
After